Electrical and magnetic properties of double perovskite: Y2CoMnO6

In this communication, the structural, micro-structural, dielectric, electrical, magnetic, and leakage-current characteristics of a double perovskite (Y₂CoMnO₆) ceramic material have been reported. The material was synthesized via a high-temperature mixed-oxide route. The compound crystallizes in a monoclinic structure which is confirmed from preliminary X-ray structural study. The morphological study by using scanning electron micrograph reveals the almost homogeneous distribution of grains throughout the surface of the sample. The nature of frequency-dependence of dielectric constant has been described by the Maxwell-Wagner model. The occurrence of a dielectric anomaly in the temperature dependence of dielectric permittivity study demonstrates the ferroelectric-paraelectric phase transition in the material. From the Nyquist plots, we found the existence of both grain and grain boundary effects. The frequency dependence of conductivity was studied by the Jonscher’s Power law, and the conduction phenomenon obeys the large overlapping polaron tunneling model. By using the Arrhenius equation, the activation energy has been calculated which is nearly equal to the energy required for the hoping of the electron. Both impedance and conductivity analysis demonstrate that the sample exhibits negative temperature coefficient of resistance (NTCR) properties indicating the semiconducting type of material at high temperatures. The anti-ferromagnetic character of the material is observed from the nature of magnetic hysteresis loop. The leakage current analysis suggests that the conduction process in the material follows the space charge limited conduction phenomenon. Such material will be helpful for modern electronic devices and spintronic applications.     

Investigation of Ambipolar Conduction and RF Stability Performance in Novel Germanium Source Dual Halo Dual Dielectric Triple Material Surrounding Gate TFET

Silicon - In this study, we present an ambipolar conduction and RF stability performance for a Germanium Source Dual Halo Dual Dielectric Triple Material Surrounding Gate Tunnel FET...     

Photoluminescence of Gallate Glass-Ceramics: Al2O3 Influence

Glass and Ceramics - The influence of Al2O3 as an additive and the heat-treatment regime on the luminescence spectra of gallate glass-ceramics was investigated. It is shown that its luminescence...     

Evaluation of the Range of Stable and Efficient Operation of Column Mass Transfer Devices with Jet-Film Contact Devices

Chemical and Petroleum Engineering - A contact device for heat and mass transfer devices with the ability to maintain the uniformity of flow distribution over the cross section of the device is...     

Current Status of Copper-Ore Processing: A Review

Russian Journal of Non-Ferrous Metals - An analysis of flowsheets for processing sulfide and oxide copper ores, reagent modes, processing equipment, and flotation indicators in some domestic and...     

Highly Active Granular Nickel Powders for Multi-Batch Production of Spongy Oxide Cathodes

Powder Metallurgy and Metal Ceramics - A process was developed for the production of agglomerated carbonyl nickel powders with spherical particles ranging from 45 to 71 μm. The powders are...     

Effect of CdO addition on photon,electron, and neutron attenuation properties of boro-tellurite glasses

This research article aims to study the effect of CdO addition on the radiation shielding characteristics of boro-tellurite glasses in the composition of 50B₂O₃ - (50-x) TeO2- xCdO, where x = 0, 10, 20, 30, 40 and 50 mol%. These glasses were exposed to gamma radiation and the transmitted gamma photons were evaluated for energies varying from 15 keV to 15 MeV using Geant4 simulation toolkit. The number of transmitted photons was then used to characterize the gamma shielding for the studied glasses in terms of linear/mass attenuation coefficients, MFP, Z_eff, and HVL. The simulation outcomes were theoretically confirmed by using Phy-X software. The beta (electron) shielding characterization of the involved glasses was also investigated by determining the projectile range and stopping power using ESTAR software. Additionally, the fast neutron shielding characterization of the glasses was achieved by evaluating removal cross-section (Σ_R). The results reveal that the CdO has a small influence on the shielding performance of the boro-tellurite glasses against gamma, beta, and neutron radiations. The shielding performance of the boro-tellurite glasses was compared with that of common shielding materials in terms of MFP. It can be concluded that the boro-tellurite glasses regardless of the concentration of CdO content have promising shielding performance to be used for radiation applications.     

The Influence of the Sequence of Application of Modifying Components on the Protective Properties of a Chemical Ammonia Absorber

Protection of Metals and Physical Chemistry of Surfaces - In this work, a universal sorbent has been obtained that works according to the mechanisms of chemisorption and adsorption by impregnating...     

Single-Cell Microgels for Diagnostics and Therapeutics

Cell encapsulation within hydrogel droplets is transforming what is feasible in multiple fields of biomedical science such as tissue engineering and regenerative medicine, in vitro modeling, and cell-based therapies. Recent advances have allowed researchers to miniaturize material encapsulation complexes down to single-cell scales, where each complex, termed a single-cell microgel, contains only one cell surrounded by a hydrogel matrix while remaining <100 μm in size. With this achievement, studies requiring single-cell resolution are now possible, similar to those done using liquid droplet encapsulation. Of particular note, applications involving long-term in vitro cultures, modular bioinks, high-throughput screenings, and formation of 3D cellular microenvironments can be tuned independently to suit the needs of individual cells and experimental goals. In this progress report, an overview of established materials and techniques used to fabricate single-cell microgels, as well as insight into potential alternatives is provided. This focused review is concluded by discussing applications that have already benefited from single-cell microgel technologies, as well as prospective applications on the cusp of achieving important new capabilities.     

Engineering Silver-Enriched Copper Core-Shell Electrocatalysts to Enhance the Production of Ethylene and C2+ Chemicals from Carbon Dioxide at Low Cell Potentials

Copper catalysts are widely studied for the electroreduction of carbon dioxide (CO₂) to value-added hydrocarbon products. Controlling the surface composition of copper nanomaterials may provide the electronic and structural properties necessary for carbon-carbon coupling, thus increasing the Faradaic efficiency (FE) towards ethylene and other multi-carbon (C₂₊) products. Synthesis and catalytic study of silver-coated copper nanoparticles (Cu@Ag NPs) for the reduction of CO₂ are presented. Bimetallic CuAg NPs are typically difficult to produce due to the bulk immiscibility between these two metals. Slow injection of the silver precursor, concentrations of organic capping agents, and gas environment proved critical to control the size and metal distribution of the Cu@Ag NPs. The optimized Cu@Ag electrocatalyst exhibited a very low onset cell potential of −2.25 V for ethylene formation, reaching a FE towards C₂₊ products (FE_C2+) of 43% at −2.50 V, which is 1.0 V lower than a reference Cu catalyst to reach a similar FE_C2+. The high ethylene formation at low potentials is attributed to enhanced C C coupling on the Ag enriched shell of the Cu@Ag electrocatalysts. This study offers a new catalyst design towards increasing the efficiency for the electroreduction of CO₂ to value-added chemicals.